Java Programming Coding Standards

File Names

Java uses the following file suffixes:

• Java Source - .java
• Java bytecode - .class

There are also some common file names used which are:

• GNUmakefile - the preferred name for makefiles. We use gnumake to build our software
• README - the preferred name for the file that summarises the contents of a particular directory

File Organisation

Java Source Files

Each Java source file contains a single public class or interface. When private classes and interfaces are associated with a public class, you can put them in the same source as the public class. The public class should be the first interface in the file.
Java source files have the foilowing ordering:

• Beginning comments
• Package and Import Statements
• Class and interface declarations

Beginning Comments

All source files should begin with a c-style comment that lists the class name, version information, date, and copyright notice:

/*
 * Classname
 * 
 * Version information
 *
 * Date
 * 
 * Copyright notice
 */

Package and Import Statements

The first non-comment line of most Java source files is a package statement. After that import statements can follow. For example:

package java.awt;

import java.awt.peer.CanvasPeer;

Class and Interface Declarations

The following table describes the parts of a class or interface declaration, in the order that they should appear.

Indentation

The normal convention is to use four spaces as the unit for Indentation. The exact construction of the indentation (spaces vs tabs) is not specified. Tbas must be set exactly every eight spaces (not four).

Line Length

Avoid lines longer than 80 characters, since they’re not handled well by many terminals and tools.
Note: Examples for use in documentation should have a shorter line length-generally no more than 70 characters.

Wrapping Lines

When your expression won’t fit on a single line, break it according to these general principles:

• Break after a comma
• Break before an operator
• Prefer higher-level breaks to lower-level breaks
• Align the new line with the beginning of the expression at the same level on the previous line
• If the above rules lead to confusing code or to code that’s squished uiup against the right margin, just indent 8 spaces instead

Here are some examples provided below:

Here are some examples of breaking method calls:

someMethod(longExpression1, longExpression2, longExpression3, 
        longExpression4, longExpression5);
 
var = someMethod1(longExpression1,
                someMethod2(longExpression2,
                        longExpression3));

Following are two examples of breaking an arithmetic expression. The first is preferred, since the break occurs outside the parenthesized expression, which is at a higher level.

longName1 = longName2 * (longName3 + longName4 - longName5)
           + 4 * longname6; // PREFER

longName1 = longName2 * (longName3 + longName4
                       - longName5) + 4 * longname6; // AVOID

Following are two examples of indenting method declarations. The first is the conventional case. The second would shift the second and third lines to the far right if it used conventional indentation, so instead it indents only 8 spaces.

//CONVENTIONAL INDENTATION
someMethod(int anArg, Object anotherArg, String yetAnotherArg,
           Object andStillAnother) {
    ...
}

//INDENT 8 SPACES TO AVOID VERY DEEP INDENTS
private static synchronized horkingLongMethodName(int anArg,
        Object anotherArg, String yetAnotherArg,
        Object andStillAnother) {
    ...
}

Line wrapping for if statements should generally use the 8-space rule, since conventional (4 space) indentation makes seeing the body difficult. For example:

//DON'T USE THIS INDENTATION
if ((condition1 && condition2)
    || (condition3 && condition4)
    ||!(condition5 && condition6)) { //BAD WRAPS
    doSomethingAboutIt();            //MAKE THIS LINE EASY TO MISS
} 

//USE THIS INDENTATION INSTEAD
if ((condition1 && condition2)
        || (condition3 && condition4)
        ||!(condition5 && condition6)) {
    doSomethingAboutIt();
} 

//OR USE THIS
if ((condition1 && condition2) || (condition3 && condition4)
        ||!(condition5 && condition6)) {
    doSomethingAboutIt();
}

Here are three acceptable ways to format ternary expressions:

alpha = (aLongBooleanExpression) ? beta : gamma;  

alpha = (aLongBooleanExpression) ? beta
                                 : gamma;  

alpha = (aLongBooleanExpression)
        ? beta 
        : gamma;

Comments

This section will show some examples of commenting. This has already been discussed in the Commenting file.

Block Comments

A block comment should be preceded by a blank line to set it apart from the rest of the code.

/*
 * Here is a block comment.
 */

Indented block comment

/*-
 * Here is a block comment with some very special
 * formatting that I want indent(1) to ignore.
 *
 *    one
 *        two
 *            three
 */

Single-Line Comments

if (condition) {

    /* Handle the condition. */
    ...
}

Trailing Comments

if (a == 2) {
    return TRUE;            /* special case */
} else {
    return isPrime(a);      /* works only for odd a */
}

End-of-line Comments

if (foo > 1) {

    // Do a double-flip.
    ...
}
else {
    return false;          // Explain why here.
}
//if (bar > 1) {
//
//    // Do a triple-flip.
//    ...
//}
//else {
//    return false;
//}

Documentation Comments

/**
 * The Example class provides ...
 */
public class Example { ...

Declarations

One kind of Java statement is a declaration statement, which is used to declare a variable by specifying its data type and name. … Instead of defining a value over and over, a variable that has a value attached to it can be defined.

Number Per Line

int level; // indentation level
int size;  // size of table

You can use spaces as shown above, or you can use tabs like so:

int     level;          // indentation level
int     size;            // size of table
Object  currentEntry;    // currently selected table entry

Initialisation

Try to initialize local variables where they’re declared. The only reason not to initialize a variable where it’s declared is if the initial value depends on some computation occurring first.

Placement

Put declarations only at the beginning of blocks. (A block is any code surrounded by curly braces ”{” and ”}”.) Don’t wait to declare variables until their first use; it can confuse the unwary programmer and hamper code portability within the scope.

void myMethod() {
    int int1 = 0;         // beginning of method block

    if (condition) {
        int int2 = 0;     // beginning of "if" block
        ...
    }
}
</blockquote>

An exception to this is within for loops, which in Java can be declared in the for statement:

for (int i = 0; i < maxLoops; i++) { ... }
</blockquote>

DO NOT declare the same variable within the loop however:

int count;
...
myMethod() {
    if (condition) {
        int count = 0;     // AVOID!
        ...
    }
    ...
}

Class and Interface Declarations

When coding Java classes and interfaces, the following formatting rules should be followed:

• No space between a method name and the parenthesis ”(” startings its parameter list
• Open brace ”{” appears at the end of the same line as the declaration statement
• Closing brace ”}” starts a line by itself indented to match its corresponding opening statement, except when it is a null statement the ”}” should appear immediately after the ”{“.

class Sample extends Object {
    int ivar1;
    int ivar2;

    Sample(int i, int j) {
        ivar1 = i;
        ivar2 = j;
    }

    int emptyMethod() {}

    ...
}

• Methods are separated by a blank line

Statements

Java statements are instructions that tell the programming language what to do, like declaration and string statements. Basic statements define variables and initiate Java methods or start the execution of blocks of other statements. Assignment statements assign values to variables.

Simple Statements

Each line contains at most one statement:

argv++;         // Correct
argc--;         // Correct  
argv++; argc--; // AVOID!

Compound Statements

Compound statements are statements that contain lists of statements enclosed in braces “{ statements }”. See the following sections for examples.

• The enclosed statements should be indented one more level than the compound statement.
• The opening brace should be at the end of the line that begins the compound statement; the closing brace should begin a line and be indented to the beginning of the compound statement.
• Braces are used around all statements, even single statements, when they are part of a control structure, such as an if-else or for statement. This makes it easier to add statements without accidentally introducing bugs due to forgetting to add braces.

Return Statements

A return statement with a value should not use parenthesis unless they make the return value more obvious in some way:

return;

return myDisk.size();

return (size ? size : defaultSize);

If, If-Else, If-Else-If Else Statements

The if-else class statement should have the following form:

if (condition) {
    statements;
}

if (condition) {
    statements;
} else {
    statements;
}

if (condition) {
    statements;
} else if (condition) {
    statements;
} else {
    statements;
}

If statements alwyas use braces, avoid the following error-prone form:

if (condition) //AVOID! THIS OMITS THE BRACES {}!
    statement;

For Statements

A for statement should have the following form:

for (initialization; condition; update) {
    statements;
}

An empty for statement (one in which all the work is done in the initialisation, condition, and update clauses) should have the following form:

for (initialization; condition; update);

While Statements

A while statement should have the following form:

while (condition) {
    statements;
}

An empty while staement should have the following form:

while (condition);

Do-While Statements

A do-while statement shopuld have the following form:

do {
    statements;
} while (condition);

Switch Statements

A switch statement should have the following form:

switch (condition) {
case ABC:
    statements;
    /* falls through */
case DEF:
    statements;
    break;
case XYZ:
    statements;
    break;
default:
    statements;
    break;
}

Every time a case falls through (doesn’t include a break statement), add a comment where the break statement would normally be. This is shown in the preceding code example with the /* falls through */ comment.

Every switch statement should include a default case. The break in the default case is redundant, but it prevents a fall-through error if later another case is added.

Try-Catch Statements

A try-catch statement shouyld have the following forrm:

try {
    statements;
} catch (ExceptionClass e) {
     statements;
}

A try-catch statement may also be followed by finally, which executes regardless of whether or not the try block has completed successfully.

try {
    statements;
} catch (ExceptionClass e) {
    statements;
} finally {
    statements;
}

White Space

Blank Lines

We use blank lines in code to improve readability, by setting off sections of code that are logically related. Two blank lines should always be used in the following circumstances:

• Between sections of a source file
• Between class and interface definitions

One blank line should always be used in the following circumstances

• Between methods
• Between the local variables in a method and its first statement
• Before a block or single-line comment
• Between logical sections inside a method to improve readability

Blank Spaces

Blank spaces should be used in the following circumstances:

• A keyword followed by a parenthesis should be seperated by a space:

while (true) {
           ...
       }

Note that a blank space should not be used between a method name and its opening parenthesis. This helps to distinguish keywords from method calls.

• A blank space should appear after commas in argument lists.
• All binary operators except . should be separated from their operands by spaces. Blank spaces should never separate unary operators such as unary minus, increment (”++”), and decrement (”—”) from their operands.

a += c + d;
    a = (a + b) / (c * d);
    
    while (d++ = s++) {
        n++;
    }
    printSize("size is " + foo + "\n");

• The expressions in a for statement should be seperated by blank spaces

• Casts should be followed by a blank space:

myMethod((byte) aNum, (Object) x);
myMethod((int) (cp + 5), ((int) (i + 3)) 
                                  + 1);

Naming Conventions

Naming conventions make programs more understandable by making them easier to read. They can also give information about the function of the identifier-for example, whether it’s a constant, package, or class-which can be helpful in understanding the code.

References

• Google Java Style Guide

• Oracle Sun Coding Standard

• Android Coding Standard (Mobile Development)